Hengst Fuel Filter E500KP02D36 For OM457/OM501/OM502 Mercedes-Benz engines
1.Part Name : Fuel Filter
2.OE NO.: E500KP02D36
3.Material： Plastic/Non-metallic
4.Weight: 0.31 KG
5.Quality: Original/High quality
6.Outer diameter: 106 mm
7.Overall height: Approx. 203 mm
8.Payment:TT.paypal.Western Union
9.Stock available: Yes
10.Installation Instructions Provided:Yes
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
E500KP02D36 is a fuel filter insert. It is a replaceable cartridge type, different from spin‑on canister filters. It fits inside a fixed housing bolted onto the engine. During maintenance, you open the housing, take out the old insert, install the new unit together with its gaskets, then close the housing back up. The original housing stays in place and does not need to be swapped out for every service.
This filter has an outer diameter of 106 mm and a height of around 203 mm. These are the key measurements for this part. Even if a different filter was fitted inside the housing previously, you should still cross‑check these two sizes against the old unit you remove. There are other fuel filter inserts with very similar dimensions, so a quick dimension check helps avoid fitting the wrong part.
Cross-Reference Part Numbers
| Brand | Number |
|---|---|
| Mercedes-Benz | 5410900051, A5410900051, 5410901152, 5410920305, 5410920405, 5410920505, 5410920805 |
| Donaldson | P550762 |
| Fleetguard | FF550762 |
Technical Specifications
| Parameter | E500KP02D36(Fuel filter insert) | E500HD129(Oil filter insert) |
| OE number | E500KP02D36(OE:A5410900151) | E500HD129(OE:A4571840125) |
| Filter type | Insert element for a reusable housing | Insert element for reusable housing |
| Outer diameter | 106 mm | 108 mm |
| Overall height | Approx.202.5‑203 mm | Approx.270 mm |
| Inner diameter (upper) | Approx.44.5 mm | Approx.42 mm |
| Inner diameter (lower) | Approx.65.5 mm | Approx.62 mm |
| Material | Multi‑layer cellulose/synthetic media, plastic end caps | Cellulose‑synthetic blend filter paper, plastic end caps |
| Sealing | Integrated gaskets, diesel fuel compatible | Integrated rubber gaskets, engine‑oil compatible |
| Net weight | Approx.0.3 kg | Approx.0.46 kg |
| Condition | New | New |
Common Problems & Solutions
Fuel starvation or hard starting - a loaded insert restricts flow before it blocks completely; replace on the service schedule rather than waiting for a stall
Leaking housing after a filter change - almost always a gasket not seated correctly or reused instead of replaced with the new insert
Wrong insert size fitted - check outer diameter and height against the numbers above; several Mercedes fuel filter inserts share a similar look but different dimensions
Water or contamination in the fuel - if your housing has a water-in-fuel sensor, check it is reconnected correctly after a filter change
Air in the fuel system after installation - prime the system according to the engine's bleeding procedure rather than assuming the engine will self-prime
Application & Compatibility
Confirmed engine fit
Mercedes-Benz OM457, OM501, OM502, OM460 and related engines in this family.
Truck platforms
Mercedes-Benz Actros and Axor trucks fitted with these engines, which is where this housing design is most commonly found.
MBE-badged engines
Some older Freightliner models built with the Mercedes-derived MBE900/MBE4000 engine share this engine lineage, but confirm your specific engine badge rather than assuming by truck brand - current Freightliner Cascadia models do not use this engine family.
Frequently Asked Questions (FAQ)
Q: Does this filter fit a Freightliner Cascadia or Western Star truck?
A: Not the current Cascadia or Western Star lineup, which run Detroit Diesel or Cummins engines. This insert is for the Mercedes-Benz OM457/OM501 engine family, found mainly in Actros and Axor trucks and in a small number of older MBE-badged Freightliner models. Check your engine badge before ordering.
Q: Is E500KP02D36 a spin-on filter or an insert?
A: It is an insert that fits inside a reusable housing. The housing bolts to the engine permanently; only the insert and its gaskets are replaced at service.
Q: What is the difference between this and the smaller OM654 fuel filter?
A: Hengst uses a similar naming pattern across different engine families, but the OM654 insert is a smaller part for a different, later engine. Match by outer diameter and height, not by the "E...KP..." code alone.
Q: Is there a minimum order quantity?
A: No, minimum order is one piece, shipped by express courier. Larger quantities for fleet maintenance stock can be arranged with a fixed price for repeat orders.
Why Choose OUNUODE
Professional Manufacturing
19+ years of experience in supply chain & manufacturing.
8000+ spare parts for European & Chinese trucks, plus engineering machinery.
Global Supply & Customization
Supported by 3 family-owned factories and 50+ cooperated factories.
OEM/ODM customization, flexible sourcing, and professional after-sales support.
19+
Years Experience
8000+
Spare Parts
12+
Production Lines
100,000+㎡
Facility Area
location
Moblie
+86 17868790791
monica@onodetruckparts.com
Hot Tags: Hengst Fuel Filter E500KP02D36 For OM457/OM501/OM502 Mercedes-Benz engines, China Hengst Fuel Filter E500KP02D36 For OM457/OM501/OM502 Mercedes-Benz engines manufacturers, suppliers, factory
You Might Also Like
-
Industrial Screw Air Compressors 1613872000
-
Cat Diesel Fuel Injector 212-3460 2123460 For Excava...
-
Heavy Construction Machinery Electronic Unit Injecto...
-
For Cummins B6.7 And L9 Series Engines Fleetguard Sp...
-
Heavy-duty Vehicle Shock Absorber Cylinder/bushing 3...
-
Atlas Copco 3115554100 Hydraulic Rock Drill Driver Q...
