Cushion Piston 3115297100 For Caterpillar Hydraulic Cylinder
OEM Part Number: 3115297100
Product Type: Cushion Piston/Gasket
Main Application: Cushioning Systems for Hydraulic Cylinders in Construction Machinery
Key Features: High-precision fit, wear-resistant and impact-resistant
Applicable Equipment: Hydraulic systems for construction machinery such as excavators and loaders
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Shaanxi Onode Lubrication Technology Co., Ltd. is one of the leading manufacturers and suppliers of cushion piston 3115297100 for caterpillar hydraulic cylinder in China. With abundant experience, we are committed to providing high quality customized products with low price. Please feel free to buy cheap cushion piston 3115297100 for caterpillar hydraulic cylinder from our factory.
Cushion Piston 3115297100 for Caterpillar Hydraulic Cylinder

Outer Diameter D: 95mmf7 (-0.036/-0.071)
Inner Diameter d: 45mmH7 (+0.025/0)
Overall Height H: 60mm ±0.2
Seal Groove Bottom Diameter d1: 85mm±0.1
Seal Groove Width b: 5.5mm +0.2/0
Guide Groove Width b1: 12mm±0.1
Chamfer Dimension C: 1.5×45° (mm ±0.2)
Detailed Technical Specifications
1. Materials and Heat Treatment Parameters
Base Material: 45# high-quality carbon structural steel, GB/T 699
Heat Treatment: Quenching and tempering + case hardening
Core Hardness: HB 220-250, GB/T 231.1
Surface Hardness: HRC 48-52, GB/T 230.1
Hardened Case Depth: 2.0-3.0mm, GB/T 5617
Tensile Strength: ≥ 800 MPa, GB/T 228.1
2. Accuracy and Geometric Tolerances
External Cylindricity: ≤ 0.008mm, roundness tester
End Face Flatness: ≤ 0.015mm, flat plate tester
Inner and Outer Circle Coaxiality: ≤ 0.025mm, three-dimensional coordinate measuring instrument
Seal Groove Symmetry: ≤ 0.05mm, projector
Surface Roughness: Ra ≤ 0.4 μm, roughness tester
3. Performance Parameters
Maximum Working Pressure: 31.5 MPa, hydraulic test
Burst Pressure: ≥ 63 MPa, destructive test
Operating Temperature Range: -30 to +120°C
Wear Life: ≥ 500,000 cycles, reciprocating test
Impact Resistance: ≥ 50J, impact test
4. Seal Fit Parameters
O-Ring Specifications: 85 × 3.55 mm, GB/T 3452.1
Step Seal Specifications: 95 × 3 mm, ISO 7425
Guide Band Specifications: 95 × 12 mm, ISO 6547
Fitting Clearance: 0.08-0.12 mm
Important Installation Instructions
Pre-installation Preparation:
Thoroughly clean the piston and mating surfaces.
Inspect the seal groove for burrs.
Confirm that all seals are intact.
Installation Precautions:
Use specialized installation tools.
Avoid impacting the sealing surfaces.
Ensure the seal is properly installed.
Tighten to the specified torque.
Operating Environment Requirements:
Working Fluid: Hydraulic Oil
Ambient Temperature: -30°C to +85°C
Filter Fineness: ≤ 10μm
Applications
This clutch plate is suitable for heavy-duty applications, including:
Transportation trucks
Construction vehicles
Long-haul freight
If you have any questions or would like to initiate the cooperation process, please don't hesitate to reach out.
address
Moblie
+8613310989421
Mail box

Hot Tags: cushion piston 3115297100 for caterpillar hydraulic cylinder, China cushion piston 3115297100 for caterpillar hydraulic cylinder manufacturers, suppliers, factory










