Donaldson Lube Filter P551808 For Caterpillar C9/C11 Engines
1.Part Name : Lube Filter
2.OE NO.: P551808
3.Material:Cellulose
4.Filtration: 99% at 21 micron
5.Thread size: 1½"-16 UN
6.Delivery time:3-5 Days
7.Packing:Carton Packing/Customization
8.Payment:TT.paypal.Western Union
9.Weight: 3 KG
10.Quality: Original/High quality
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Shaanxi Onode Lubrication Technology Co., Ltd. is one of the leading manufacturers and suppliers of donaldson lube filter p551808 for caterpillar c9/c11 engines in China. With abundant experience, we are committed to providing high quality customized products with low price. Please feel free to buy cheap donaldson lube filter p551808 for caterpillar c9/c11 engines from our factory.
P551808 is a full-flow spin-on lube filter built around pleated cellulose media, sized for medium and large diesel engines in the Caterpillar C9 through C32 range.
As a full-flow filter, all of the engine's oil passes through this canister before reaching the bearings, so the media is sized to keep pressure drop low even as it loads with contamination over a service interval. The steel canister and internal anti-drainback and bypass valves are standard Donaldson lube filter construction, built to handle the vibration and thermal cycling typical of construction and mining equipment.

Cross-Reference Part Numbers
| Brand | Number |
|---|---|
| Donaldson | P551808 |
| Caterpillar | 1R1808, 275-2604, 389-0434 |
| Baldwin | B7299 |
| Perkins | 4587260 |
| Fleetguard | LF3566 |
Technical Specifications
| OE number | P551808 |
|---|---|
| Type | Full-flow, spin-on |
| Filter media | Cellulose |
| Filtration efficiency | 99% at 21 micron |
| Outer diameter | 136 mm (5.35 in) |
| Length | 308 mm (12.13 in) |
| Thread size | 1½"-16 UN |
| Gasket outer diameter | 110 mm (4.33 in) |
| Gasket inner diameter | 100 mm (3.94 in) |
| Collapse burst pressure | 10.3 bar (149 psi) |
| Net weight | Approx. 1.8 kg (4 lb) |
| Condition | New |
Application & Compatibility
Confirmed Caterpillar range
C9, C11, C12, C13, C15, C16, C18 and C32 series diesel engines, covering a wide span of Caterpillar-powered construction and mining equipment.
Beyond Caterpillar
Because of the Perkins and Baldwin cross-references, this filter also fits equipment from other manufacturers built on the same engine platform, including some Freightliner CT660 trucks specified with a CAT engine.
Verify before ordering
Match the number on your old filter or your engine's parts manual entry, since several Caterpillar engines of a similar size use a different filter length or thread.
Oil Filter LF777 Installation Notes
Clean the mounting surface on the engine before fitting a new filter
Lubricate the new gasket with clean engine oil before installation - never fit a dry gasket
Hand-tighten until the gasket contacts the mounting base, then add a further partial turn as specified by your engine's service manual rather than a fixed torque figure
Check for leaks after startup before returning the equipment to normal duty
Common Problems & Solutions
Leaking after installation - almost always a dry or reused gasket, or the filter not fully seated on the mounting base
Low oil pressure warning after a filter change - confirm the filter threaded on fully and the old gasket was not left stuck to the mounting face
Filter loaded faster than expected - check the service interval against your operating conditions; dusty sites shorten filter life regardless of filter brand
Wrong filter length ordered - several Caterpillar engines share a similar diameter but different length; confirm both dimensions, not just the outer diameter
Frequently Asked Questions (FAQ)
Q: Does P551808 only fit Caterpillar engines?
A: No. The same physical filter also cross-references to Baldwin and Perkins numbers, so it appears on equipment from other manufacturers built with a Perkins engine, in addition to the confirmed Caterpillar C9-C32 range.
Q: What is the difference between 1R1808 and P551808?
A: They are cross-referenced numbers for the same filter - 1R1808 is the Caterpillar-side number and P551808 is the Donaldson number. Either can be used to order the correct part.
Q: How often should this filter be changed?
A: Every 250 operating hours is a common baseline, but always follow your engine's own maintenance manual, and shorten the interval in dusty or high-load conditions.
Q: Is this filter certified to a specific standard?
A: We were unable to independently confirm a specific ISO certification for this exact filter model, so we do not state one. If your project requires a documented test standard, tell us and we will confirm what the manufacturing factory can provide.
Why Choose OUNUODE
Professional Manufacturing
19+ years of experience in supply chain & manufacturing.
8000+ spare parts for European & Chinese trucks, plus engineering machinery.
Global Supply & Customization
Supported by 3 family-owned factories and 50+ cooperated factories.
OEM/ODM customization, flexible sourcing, and professional after-sales support.

19+
Years Experience
8000+
Spare Parts
12+
Production Lines
100,000+㎡
Facility Area


location
Moblie
+86 17868790791
monica@onodetruckparts.com

Hot Tags: Donaldson Lube Filter P551808 For Caterpillar C9/C11 Engines, China Donaldson Lube Filter P551808 For Caterpillar C9/C11 Engines manufacturers, suppliers, factory












