WVA 29087 Brake Pads: Knorr SB7/SN7 Air Disc Brake System, Identification and Replacement Guide
Nov 13, 2026

1. WVA 29087 and Knorr SB7/SN7 Brake System
WVA 29087 is a catalogue reference for heavy-duty commercial vehicle disc brake pads. It is associated with the Knorr-Bremse SB7/SN7 air disc brake system, commonly used in 22.5-inch commercial vehicle brake applications.
In an air disc brake system, compressed air operates the brake actuator, which applies force through the caliper mechanism. The brake pads are pressed against the rotating brake disc to generate friction and slow down the vehicle.
The WVA 29087 reference appears in commercial vehicle parts catalogues alongside several related WVA numbers, including 29059, 29061, 29106 and 29202. These references should not automatically be treated as interchangeable without checking the brake assembly and pad design.
For truck and trailer parts distributors, identifying the correct brake system is an important first step before selecting a replacement pad.
2. Air Disc Brake Pad Structure and Components

A commercial vehicle disc brake pad assembly consists of several functional components:
Friction Material: Creates friction against the brake disc during braking.
Backing Plate: Supports the friction material and transfers braking force.
Retaining Spring: Helps secure the brake pad within the caliper assembly.
Retaining Pin and Clips: Prevent the pad assembly from moving out of its designated position.
Wear Indicator: Provides a wear warning where the brake system is equipped with a compatible sensor.
The brake pad itself is only one part of the braking assembly. Correct installation also depends on the condition and compatibility of the caliper, retaining hardware and brake disc.
When purchasing WVA 29087 brake pads, buyers should confirm whether the supply includes the fitting kit, springs, pins and other accessories, rather than assuming every product is supplied in the same configuration.
3. Brake Pad Friction Material and Braking Performance

Friction material plays a major role in commercial vehicle braking performance. Its formulation influences friction stability, wear characteristics, heat resistance, noise and interaction with the brake disc.
For heavy-duty trucks operating with frequent braking, high axle loads and long-distance transportation, friction material needs to maintain suitable braking performance across different operating temperatures.
Key performance considerations include:
Friction Stability: Consistent friction performance during repeated braking.
Heat Resistance: Resistance to performance deterioration under elevated temperatures.
Wear Characteristics: Balanced wear between the brake pad and brake disc.
Noise and Vibration: Control of unwanted noise and vibration during braking.
Mechanical Integrity: Reliable bonding between the friction lining and backing plate.
Different manufacturers may use different friction formulations for the same WVA reference. Therefore, buyers should evaluate material specifications and available test reports instead of judging a brake pad solely by its catalogue number.
4. Brake Pad Wear Inspection and Replacement

Brake pad wear is a normal result of friction during vehicle operation. However, uneven or excessive wear may indicate problems beyond the friction material itself.
Common inspection points include:
Friction Lining Thickness
Check the remaining friction material against the applicable manufacturer's wear limits. Replace pads when they reach the specified service limit.
Uneven Pad Wear
Different wear levels between inner and outer pads may indicate caliper movement, guide mechanism or installation problems.
Brake Disc Condition
Inspect the disc surface for cracks, scoring, excessive wear and heat-related damage. A new brake pad cannot compensate for a damaged or excessively worn disc.
Caliper and Fitting Components
Check the caliper movement, retaining springs, pins and clips to ensure that the brake pad assembly is correctly installed and operates as intended.
Wear Indicator
Where fitted, inspect the wear sensor and its electrical connections. Replace damaged components according to the brake system manufacturer's instructions.
For fleet operators and repair workshops, inspecting the complete braking assembly during pad replacement helps identify potential problems and reduce repeated maintenance.
5. WVA 29087 Identification and Cross-Reference
WVA numbers are widely used in commercial vehicle brake pad catalogues to identify pad designs. However, a WVA reference should be treated as an identification starting point rather than the only basis for vehicle compatibility.
For WVA 29087, buyers should check the following information:
|
Identification Item |
What to Check |
|---|---|
|
WVA Number |
|
|
Brake System |
Knorr-Bremse SB7/SN7 reference |
|
Pad Dimensions |
Approximately 247.5–248 × 109.5 × 30 mm in referenced catalogues |
|
Pad Shape |
Compare the complete pad outline and retaining features |
|
OE Number |
Verify the corresponding original part number |
|
Axle Position |
Confirm front or rear axle application |
|
Fitting Kit |
Check included springs, pins and clips |
Several commercial parts catalogues associate WVA 29087 with Knorr SB7/SN7 applications. Cross-reference information also appears under different manufacturers' part numbers and vehicle OE references.
However, a shared WVA number does not guarantee that every listed reference is interchangeable in every vehicle configuration. Always verify the original part number, brake caliper, pad dimensions and axle application before ordering.
6. Brake Pad Quality Control and ECE R90
Quality control is an important consideration when sourcing replacement brake pads for commercial vehicles.
Professional inspection and testing may cover:
Dimensional inspection of the friction lining and backing plate.
Visual inspection for cracks, defects and bonding issues.
Friction performance under specified test conditions.
Wear performance and thermal stability.
Batch identification and production traceability.
ECE R90 is a regulatory framework concerning the approval of replacement braking components, including applicable replacement brake lining assemblies.
Its requirements and applicability depend on the product category, vehicle and target market. Buyers supplying regulated markets should request the relevant approval documentation and verify that it covers the specific product being purchased.
For distributors and importers, reviewing product documentation, quality inspection procedures and traceability information helps establish a more reliable supply relationship.
7. WVA 29087 Brake Pad Sourcing for Truck and Trailer Parts Distributors
For truck parts importers, wholesalers and distributors, brake pad sourcing involves more than matching a catalogue number.
Before placing a bulk order, buyers should confirm:
WVA and OE reference numbers.
Brake caliper and axle compatibility.
Product dimensions and pad shape.
Friction material specifications.
Whether fitting accessories are included.
Available inspection reports and applicable certifications.
Packaging, quantity requirements and supply arrangements.
Providing an existing brake pad sample, OE number or clear product photograph can help suppliers identify the required replacement part more accurately.
Onode Supply Support
Onode supplies commercial vehicle brake components and truck spare parts for international B2B customers. For WVA 29087 enquiries, buyers can provide the vehicle brand, OE reference, existing pad photograph or brake caliper information for product identification and quotation.
Contact Onode to discuss product availability, specifications, packaging and bulk purchasing requirements.
Frequently Asked Questions
Q: 1. What Brake System Is Associated With WVA 29087?
A: WVA 29087 is listed in commercial vehicle brake pad catalogues for Knorr-Bremse SB7/SN7 air disc brake applications. Confirm the actual caliper and vehicle configuration before ordering.
Q: 2. Are WVA 29087 And WVA 29106 Interchangeable?
A: Some catalogues group these references under the same Knorr SB7/SN7 brake system. However, catalogue grouping alone does not establish universal interchangeability. Check the pad outline, dimensions and OE reference.
Q: 3. What Are The Dimensions Of WVA 29087?
A: Referenced catalogues list dimensions of approximately 247.5–248 mm in length, 109.5 mm in height and 30 mm in thickness. Confirm the exact dimensions against the supplier's product drawing.
Q: 4. Does WVA 29087 Include Fitting Accessories?
A: The supplied accessories depend on the manufacturer and product package. Confirm whether retaining springs, pins, clips and other fitting hardware are included before purchasing.
Q: 5. Can WVA 29087 Be Used On SHACMAN Trucks?
A: The WVA reference alone cannot confirm SHACMAN compatibility. Buyers should provide the SHACMAN model, axle configuration, brake caliper information or original OE number for verification.
Q: 6. What Causes Uneven Wear On Air Disc Brake Pads?
A: Possible factors include restricted caliper movement, guide mechanism problems, installation issues, brake disc condition and differences in braking load. The complete brake assembly should be inspected before fitting replacement pads.
Q: 7. What Information Should Buyers Provide When Requesting A WVA 29087 Quotation?
A: Provide the WVA number, OE number if available, vehicle and axle information, required quantity and fitting kit requirements. Product photographs or existing pad samples can further improve identification accuracy.
Our address
No. 9, Sanqiao Road, Fengdong New City, Xi'xian New
District, Xi'an, Shaanxi, China
Phone Number
+8613310989421







