Where can I buy a turbocharger?

Turbocharger is a key component of an engine. It increases mechanical power and improves fuel economy by compressing more air flowing into the engine cylinders.

In an internal combustion engine, the turbocharger uses the energy of waste gas to compress the incoming air, forcing more air into the engine to generate more power.

The turbocharger consists of two parts: a turbine and a compressor.
The turbine housing guides the waste gas to the turbine wheel, and the energy of the waste gas drives the turbine wheel to rotate, and the waste gas is discharged from the turbine housing through the exhaust port.
The compressor wheel is connected to the turbine wheel via a forged steel shaft. The turbine drives the compressor wheel to rotate, and the high-speed rotating wheel sucks in air and compresses it. The compressor housing converts high-speed, low-pressure airflow into high-pressure, low-speed airflow.

1.Remove old gasket material from the exhaust manifold and pipe. The surfaces of the flange must be clean and have no damage.
2.Remove all plastic or foam blanking plugs from the turbo.
3.Position the turbo onto manifold or engine block using the correct new gasket or O ring, and then reconnect the exhaust pipe.
4.Tighten all nuts and bolts to the correct torque. Pay special attention to oil feed and drain lines, which must be totally clean and have no damage to ensure unrestricted oil flow. We recommend fitting a new oil inlet pipe when installing the new turbo.
5.Install oil drain line to the turbocharger, then pour new engine oil into the oil inlet hole of the turbocharger and fit the oil feed line. Spin the compressor wheel by hand a few times – it should spin freely. Note that it is normal to feel some up and down movement of the wheels. Install inlet and outlet air hoses to turbocharger compressor housing and make sure that the connection is airtight.
Turbocharger installed successfully.

Confirm the brand and model of the turbocharger, and you can find this product in our store.  Click here